Archives

  • Synthesis and Sintering Vol. 2 No. 3 (2022) Vol. 2 No. 3 (2022)
  • Synthesis and Sintering Vol. 2 No. 2 (2022) Vol. 2 No. 2 (2022)
  • Synthesis and Sintering Vol. 2 No. 1 (2022) Vol. 2 No. 1 (2022)

    1. Synthesis and sintering of Fe-32Mn-6Si shape memory alloys prepared by mechanical alloying
    2. Molecular hydrogen production by radiolysis of water on the surface of nano-ZrO2 under the influence of gamma rays
    3. Impact of bridging oxygens formation on optical properties of Fe3+ doped Li2O–Al2O3–SiO2–TiO2 glasses
    4. Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part III: microstructure
    5. Performance of glucose, sucrose and cellulose as carbonaceous precursors for the synthesis of B4C powders
    6. Oxidation-affected zone in the sintered ZrB2–SiC–HfB2 composites
    7. Recent advances in hydrogen production using MXenes-based metal sulfide photocatalysts

  • Synthesis and Sintering, Vol. 1, No. 4, 2021 Vol. 1 No. 4 (2021)

    1. Thermodynamically study of phase formation of Ni-Ti-Si nanocomposites produced by self-propagating high-temperature synthesis method
    2. Sintering behavior and microwave dielectric properties of CaTi1-x(Nb1/2Al1/2)xO3
    3. Challenges toward applying UHTC-based composite coating on graphite substrate by spark plasma sintering
    4. Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part II: phase evolution
    5. Microstructure and mechanical properties of Ti3SiC2 MAX phases sintered by hot pressing
    6. Hydrogen evolution via noble metals based photocatalysts: A review
    7. Sol-gel zinc oxide nanoparticles: advances in synthesis and applications

  • Synthesis and Sintering, Vol. 1, No. 3, 2021 Vol. 1 No. 3 (2021)

    1. Wear behavior of self-propagating high-temperature synthesized Cu-TiO2 nanocomposites
    2. Ab-initio study of paramagnetic defects in Mn and Cr doped transparent polycrystalline Al2O3 ceramics
    3. Experimental investigation and parameter optimization of Cr2O3 atmospheric plasma spray nanocoatings
    4. Advances in metal-based vanadate compound photocatalysts: synthesis, properties and applications
    5. Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part I: sintering and densification
    6. Tribological behavior and mechanical properties of friction stir processed HDPE/Fe-Fe3O4 composites
    7. Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum

  • Synthesis and Sintering, Vol. 1, No. 2, 2021 Vol. 1 No. 2 (2021)

    1. Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites
    2. Numerical investigation of solar collectors as a potential source for sintering of ZrB2
    3. Electrochemical evaluation of the hydroxyapatite coating synthesized on the AZ91 by electrophoretic deposition route
    4. The effect of synthesized Cu2O on the microbial corrosion inhibition of urban sewer systems
    5. Pressureless sinterability study of ZrB2–SiC composites containing hexagonal BN and phenolic resin additives
    6. Direct catalytic production of dimethyl ether from CO and CO2: A review
    7. Corrosion and mechanical behavior evaluation of in-situ synthesized Cu-TiB2 nanocomposite

  • Synthesis and Sintering, Vol. 1, No. 1, 2021 Vol. 1 No. 1 (2021)

    1. Recent advances in synthesis and applications of mixed matrix membranes
    2. Pulsed electric current sintering of TiB2-based ceramics using nitride additives
    3. Role of Si3N4 on microstructure and hardness of hot-pressed ZrB2−SiC composites
    4. Influence of molybdenum content on the microstructure of spark plasma sintered titanium alloys
    5. In-situ synthesis of TiN and TiB2 compounds during reactive spark plasma sintering of BN–Ti composites
    6. Effect of graphite die geometry on energy consumption during spark plasma sintering of zirconium diboride
    7. Effects of carbon nano-additives on characteristics of TiC ceramics prepared by field-assisted sintering