A review of circuit analog absorbers: material synthesis, processing strategies, and electromagnetic applications en en Circuit analog absorbers (CAAs) represent a class of engineered functional materials designed for efficient electromagnetic wave attenuation through impedance matching and resonance-based mechanisms. While traditionally analyzed using electromagnetic circuit models, their practical realization critically depends on material synthesis strategies, microstructural engineering, and controlled fabrication processes. This review presents a comprehensive overview of CAAs from both electromagnetic and materials science perspectives, covering the evolution from classical absorber configurations to modern frequency selective surface (FSS) and metamaterial-based designs. Particular emphasis is placed on the synthesis of conductive and resistive materials, including carbon-based polymer composites, nanoparticle-derived metallic films, and multifunctional hybrid systems. The role of additive manufacturing, multilayer lamination, thermal consolidation, and low-temperature sintering in controlling electrical conductivity, dielectric response, and surface impedance is critically analyzed. Processing–structure–property relationships governing broadband absorption, polarization stability, and angular performance are discussed in the context of thermodynamic and kinetic phenomena including percolation network formation, polymer curing reactions, and nanoparticle sintering mechanisms. By integrating synthesis science with electromagnetic modeling, this review highlights how advanced fabrication routes and material engineering enable the development of thin, broadband, and mechanically robust absorbers suitable for radar cross-section reduction, electromagnetic interference shielding, and next-generation communication systems. The presented analysis provides a synthesis-oriented framework for future research on high-performance absorber materials and advanced sintering-driven fabrication strategies. 12 25 Alireza Bayat Faculty of Technical and Engineering, Electrical Engineering-Telecommunication Imam Khomeini International University, Qazvin Iran abaiat@eng.ikiu.ac.ir Reza Mirzakhani Faculty of Technical and Engineering, Electrical Engineering-Telecommunication Imam Khomeini International University, Qazvin Iran Pouria Dianati Souha Department of Aeronautical Engineering, Faculty of Aviation and Space Science University of Kyrenia, Kyrenia, Mersin 10 Turkey Circuit analog absorbers Frequency selective surfaces (FSS) Metamaterial absorbers Material synthesis Additive manufacturing Electromagnetic wave absorption Vol 6 No 1 Paper 2.pdf [1] B.A. Munk, P. Munk, J. Pryor, On Designing Jaumann and Circuit Analog Absorbers (CA Absorbers) for Oblique Angle of Incidence, IEEE Trans. Antennas Propag. 55 (2007) 186–193. https://doi.org/10.1109/TAP.2006.888395. ##[2] S. Ghosh, S. Bhattacharyya, K.V. Srivastava, Design and analysis of a broadband single layer circuit analog absorber, 46th European Microwave Conference (EuMC). 2016 (2016) 584–587. https://doi.org/10.1109/EuMC.2016.7824410. ##[3] B.A. Munk, Frequency Selective Surfaces: Theory and Design, Wiley. (2005). https://doi.org/10.1002/0471723770. ##[4] M. Chen, X. Zhu, H. Lei, D. Fang, Z. Zhang, Optimal Design of Broadband Radar Absorbing Sandwich Structure with Circuit Analog Absorber Core, Int. J. Appl. Mech. 07 (2015) 1550020. https://doi.org/10.1142/S1758825115500209. ##[5] Z. Yao, S. Xiao, Z. Jiang, L. Yan, B.Z. Wang, On the Design of Ultrawideband Circuit Analog Absorber Based on Quasi-Single-Layer FSS, IEEE Antennas Wirel. Propag. Lett. 19 (2020) 591–595. https://doi.org/10.1109/LAWP.2020.2972919. ##[6] N. Liu, J. Li, X. Sheng, H. Fu, An equivalent circuit model based design method for wideband absorber using resistive FSS, Phys. Scr. 99 (2024) 095548. https://doi.org/10.1088/1402-4896/ad6f4b. ##[7] J.W. Yu, Y. Cai, X.Q. Lin, X. Wang, Perforated Multilayer Ultrawideband Absorber Based on Circuit Analog Absorber With Optimal Air Spaces, IEEE Antennas Wirel. Propag. Lett. 19 (2020) 34–38. https://doi.org/10.1109/LAWP.2019.2951845. ##[8] J. Sun, Q. Li, X. Fang, A Novel Reconfigurable Absorber/Radiator Based on SEMC Antenna, IEEE International Conference on Computational Electromagnetics (ICCEM). 2024 (2024) 15–17. https://doi.org/10.1109/ICCEM60619.2024.10559043. ##[9] S. Ghosh, K.V. Srivastava, A Polarization-Independent Broadband Multilayer Switchable Absorber Using Active Frequency Selective Surface, IEEE Antennas Wirel. Propag. Lett. 16 (2017) 3147–3150. https://doi.org/10.1109/LAWP.2017.2766100. ##[10] K.H. Murali Naik, A.K. Singh, D. Rama Krishna, Ultrathin wideband low profile circuit analog metamaterial absorber, Microw. Opt. Technol. Lett. 66 (2024) e34247. https://doi.org/10.1002/mop.34247. ##[11] Z. Ma, C. Jiang, W. Cao, J. Li, X. Huang, An Ultrawideband and High-Absorption Circuit-Analog Absorber With Incident Angle-Insensitive Performance, IEEE Trans. Antennas Propag. 70 (2022) 9376–9384. https://doi.org/10.1109/TAP.2022.3177490. ##[12] Y. Han, W. Che, C. Christopoulos, Y. Xiong, Y. Chang, A fast and efficient design method for circuit analog absorbers consisting of resistive square-loop arrays, IEEE Trans. Electromagn. Compat. 58 (2016) 747–757. https://doi.org/10.1109/TEMC.2016.2524553. ##[13] V. Inbavalli, V. Sakthivel, C. Venkatesh, S.K. TR, Design of Broadband Circuit Analog Absorber With Optimal Thickness for Stable Angular Response in C, X, Ku, and K Bands, IEEE Trans. Electromagn. Compat. 65 (2023) 2065–2069. https://doi.org/10.1109/TEMC.2023.3298816. ##[14] J.D. Jackson, Classical electrodynamics, John Wiley and Sons. (2021). https://doi.org/10.1119/1.19136. ##[15] D.M. Pozar, Microwave engineering: theory and techniques, John Wiley and Sons, Singapore. (2021). ##[16] T. Sergei, Analytical Modeling in Applied Electromagnetics, Artech. (2003). ##[17] R.F. Harrington, Field Computation by Moment Methods, Wiley. (1993). https://doi.org/10.1007/978-3-642-50319-1_10. ##[18] F. Costa, A. Monorchio, G. Manara, An Overview of Equivalent Circuit Modeling Techniques of Frequency Selective Surfaces and Metasurfaces, Appl. Comput. Electromagn. Soc. J. (2014) 960–976. https://doi.org/10.1002/ecjb.20162. ##[19] J.D. Kraus, D.A. Fleisch, Electromagnetics: With Applications, WCB/McGraw-Hill. (1999). https://doi.org/10.1002/9781394283491.ch2. ##[20] A. Alù, N. Engheta, Achieving transparency with plasmonic and metamaterial coatings, Phys. Rev. E. 72 (2005) 016623. https://doi.org/10.1103/PhysRevE.72.016623. ##[21] H.A. Wheeler, Transmission-Line Properties of a Strip on a Dielectric Sheet on a Plane, IEEE Trans. Microw. Theory Tech. 25 (1977) 631–647. https://doi.org/10.1109/TMTT.1977.1129179. ##[22] L. Zhang, S. Liu, T. Cui, Theory and application of coding metamaterials, Chin. Opt. 10 (2017) 1–12. https://doi.org/10.3788/CO.20171001.0001. ##[23] N.I. Landy, S. Sajuyigbe, J.J. Mock, D.R. Smith, W.J. Padilla, Perfect metamaterial absorber, Phys. Rev. Lett. 100 (2008) 207402. https://doi.org/10.1103/PhysRevLett.100.207402. ##[24] R.L. Fante, M.T. McCormack, Reflection properties of the Salisbury screen, IEEE Trans. Antennas Propag. 36 (1988) 1443–1454. https://doi.org/10.1109/8.8632. ##[25] M. Paquay, J.C. Iriarte, I. Ederra, R. Gonzalo, P.d. Maagt, Thin AMC Structure for Radar Cross-Section Reduction, IEEE Trans. Antennas Propag. 55 (2007) 3630–3638. https://doi.org/10.1109/TAP.2007.910306. ##[26] F. Costa, S. Genovesi, A. Monorchio, On the Bandwidth of High-Impedance Frequency Selective Surfaces, IEEE Antennas Wirel. Propag. Lett. 8 (2009) 1341–1344. https://doi.org/10.1109/LAWP.2009.2038346. ##[27] L. Sun, H. Cheng, Y. Zhou, J. Wang, Broadband metamaterial absorber based on coupling resistive frequency selective surface, Opt. Express. 20 (2012) 4675–4680. https://doi.org/10.1364/OE.20.004675. ##[28] J. Chen, Y. Shang, C. Liao, Double-Layer Circuit Analog Absorbers Based on Resistor-Loaded Square-Loop Arrays, IEEE Antennas Wirel. Propag. Lett. 17 (2018) 591–595. https://doi.org/10.1109/LAWP.2018.2805333. ##[29] A.P. Sohrab, Z. Atlasbaf, A circuit analog absorber with optimum thickness and response in X-band, IEEE Antennas Wirel. Propag. Lett. 12 (2013) 276–279. https://doi.org/10.1109/LAWP.2013.2248073. ##[30] M. Saikia, K.V. Srivastava, Design of Thin Broadband Microwave Absorber using Combination of Capacitive and Circuit Analog Absorbers, IEEE Indian Conference on Antennas and Propagation (InCAP). 2018 (2018) 1–4. https://doi.org/10.1109/INCAP.2018.8770777. ##[31] A. Monti, A. Alù, A. Toscano, F. Bilotti, The design of optical circuit-analog absorbers through electrically small nanoparticles, Photonics. 6 (2019) 26. https://doi.org/10.1038/s41598-025-99904-x. ##[32] Z. Yao, S. Xiao, Y. Li, B.-Z. Wang, Wide-angle, ultra-wideband, polarization-independent circuit analog absorbers, IEEE Trans. Antennas Propag. 70 (2022) 7276–7281. https://doi.org/10.1109/TAP.2022.3149594. ##[33] Q. Guo, J. Su, Z. Li, Design of circuit analog absorber using characteristic mode analysis, IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP). (2020) 1–3. https://doi.org/10.1109/IMWS-AMP49156.2020.9199671. ##[34] T.J. Prince, E.J. Riley, S.W. Miller, Additive Manufacturing of PLA-Based Microwave Circuit-Analog Absorbers, IEEE Trans. Electromagn. Compat. 63 (2021) 1341–1346. https://doi.org/10.1109/TEMC.2020.3044014. ##[35] X. Lv, S.J. Chen, A. Galehdar, W. Withayachumnankul, C. Fumeaux, Fast semi-analytical design for single-FSS-layer circuit-analog absorbers, IEEE Open J. Antennas Propag. 1 (2020) 483–492. https://doi.org/10.1109/TAP.2020.2983756. ##[36] E.J. Riley, E.H. Lenzing, R.M. Narayanan, Application of unidirectional carbon-fiber-reinforced-polymer laminas in circuit-analog absorbers, IEEE Trans. Electromagn. Compat. 60 (2018) 1743–1751. https://doi.org/10.1109/TEMC.2017.2781142. ##[37] A.K. Zadeh, A. Karlsson, Capacitive circuit method for fast and efficient design of wideband radar absorbers, IEEE Trans. Antennas Propag. 57 (2009) 2307–2314. https://doi.org/10.1109/TAP.2009.2024490. ##[38] E.J. Riley, E.H. Lenzing, R.M. Narayanan, X-band circuit-analog absorbers using unidirectional carbon fiber, IEEE Antennas Wirel. Propag. Lett. 17 (2018) 1060–1063. https://doi.org/10.1109/LAWP.2018.2831909. ##[39] Y. Shang, Z. Shen, S. Xiao, On the design of single-layer circuit analog absorber using double-square-loop array, IEEE Trans. Antennas Propag. 61 (2013) 6022–6029. https://doi.org/10.22061/jecei.2018.790. ##[40] A.A. Ovhal, A. Parameswaran, D. Kundu, H.S. Sonalikar, Design of a wide-band circuit analog absorber using modified square loop loaded with lumped resistors, IEEE Wireless Antenna and Microwave Symposium (WAMS). 2022 (2022) 1–4. https://doi.org/10.1109/WAMS54719. ##[41] R. Mirzakhani, A. Bayat, Novel Design of Optically Transparent Circuit Analog Absorber by Modifying of exponentially tapered edge of element to achieve wider Bandwidth, AUT J. Model. Simul. 56 (2024) 55–68. https://doi.org/10.22060/miscj.2024.22964.5353. ##[42] J. Xiong, J. Shen, Y. Gao, Real-Time On-Demand Design of Circuit-Analog Plasmonic Stack Metamaterials by Divide-and-Conquer Deep Learning, Laser Photonics Rev. 17 (2023) 2100738. https://doi.org/10.1002/lpor.202100738. ##[43] J.C. O'Donnell, R.M. Narayanan, Impact damage characterization for varying areal-weight unidirectional carbon fiber-reinforced polymer circuit-analog absorbers, Compos. B: Eng. 202 (2020) 108427. https://doi.org/10.1016/j.compositesb.2020.108427. ##[44] Q. Zhou, P. Liu, M. Fu, G. Chen, P. Li, Design of a broadband circuit analog absorber based on double rings structure, IEEE 17th International Conference on Communication Technology (ICCT). 2017 (2017) 382–385. https://doi.org/10.1109/ICCT.2017.8359666. ##[45] M.A. Shukoor, S. Dey, S.K. Koul, A Novel Broadband Polarization Insensitive Circuit Analog Absorber (CAA) for Radar Cross Section (RCS) Reduction Applications at X. and Ku-Bands, IEEE Indian Conference on Antennas and Propagation (InCAP). 2021 (2021) 665–668. https://doi.org/10.1109/InCAP52216.2021.9726277. ##[46] S. Ghosh, S. Bhattacharyya, D. Chaurasiya, K.V. Srivastava, A broadband polarization-insensitive circuit analog absorber using lumped resistors, IEEE Applied Electromagnetics Conference (AEMC). 2015 (2015) 1–2. https://doi.org/10.1109/AEMC.2015.7509244. ##[47] Z. Meng, D. Liu, Y. Pang, J. Wang, Y. Jia, et al., Multispectral Hierarchical Metamaterials with Broadband Microwave Absorption, Gradient Infrared Emissivity, and High Visible Transparency, Adv. Mater. Technol. 10 (2024) 2400835. https://doi.org/10.1002/admt.202400835. ##[48] W. Zhang, X. Wang, K. Yang, A dual-band broadband absorber using frequency selective surface for satellite antenna, Sci. Rep. 14 (2024) 28311. https://doi.org/10.1038/s41598-024-79804-2. ##[49] B.-X. Wang, Y. He, P. Lou, N. Xu, X. Wang, et al., Multiple-band terahertz metamaterial absorber using multiple separated sections of metallic rectangular patch, Front. Phys. 8 (2020) 308. https://doi.org/10.3389/fphy.2020.00308. ##[50] H. Xiao, R. Qin, M. Lv, C. Wang, Highly transparent broadband and polarization-insensitive absorber based on metasurface, Appl. Sci. 10 (2020) 9125. https://doi.org/10.3390/app10249125. ##[51] A.E. Assal, H. Breiss, R. Benzerga, A. Sharaiha, A. Jrad, A. Harmouch, Toward an ultra-wideband hybrid metamaterial based microwave absorber, Micromachines. 11 (2020) 930. https://doi.org/10.3390/mi11100930. ##[52] S. Narayan, J. Sreeja, V.V. Surya, B. Sangeetha, R.U. Nair, Radar Absorbing Structures Using Frequency Selective Surfaces: Trends and Perspectives, J. Electronic Mater. 49 (2020) 1728–1741. https://doi.org/10.1007/s11664-019-07911-2. ##[53] H. Singh, R.M. Jha, Active Radar Cross Section Reduction: Theory and Applications, Cambridge: Cambridge University Press. (2015). https://doi.org/10.1017/CBO9781316136171. ##[54] M. Ramkumar, C. Sudhendra, K. Rao, A novel low RCS microstrip antenna array using thin and wideband radar absorbing structure based on embedded passives resistors, Prog. Electromagn. Res. C. 68 (2016) 153–161. https://doi.org/10.2528/PIERC16080506. ##[55] Y. Fu, T. Shen, J. Dou, Mutual Coupling Reduction of a Multiple-Input Multiple-Output Antenna Using an Absorber Wall and a Combline Filter for V2X Communication, Sensors. 23 (2023) 6355. https://doi.org/10.3390/s23146355. ##[56] W. Tang, Z. Shen, Simple design of thin and wideband circuit analogue absorber, Electron. Lett. 43 (2007) 689–691. https://doi.org/10.1049/el:20070956. ##[57] D.J. Kern, D.H. Werner, A genetic algorithm approach to the design of ultra-thin electromagnetic bandgap absorbers, Microw. Opt. Technol. Lett. 38 (2003) 61–64. https://doi.org/10.1002/mop.10971. ##[58] H.T. Chou, J.W. Liu, T. Chang, Y.S. Chang, A Design of Perodic Circuit Analog Absorber at X-band and its Fabrication Discrepancy Analysis, IEEE International Symposium on Radio-Frequency Integration Technology (RFIT). 2021 (2021) 1–3. https://doi.org/10.1109/RFIT52905.2021.9565252. ##[59] G. Singh, S. Ghosh, A Comparative Analysis between Circuit Analog and Capacitive Circuit based Broadband Absorbers, National Conference on Communications (NCC). 2020 (2020) 1–5. https://doi.org/10.1109/NCC48643.2020.9056000.